Alaska
Alaska

Cut Edge Belts – Maxi Flex Back

ISO 4183, DIN 2211, DIN 1813, DIN 7753, DIN 2215, RMA IP-23

Alaska Maxi Flex Cogged Belts provides a good fitment in the pulley groove as well as provides low working temperature which increases the belt service life. A special fiber loaded rubber compound provides great wear resistant and resist deformation of the belt. These belts are suitable for smaller pulley dia drive with high speed. 

Features
  • High Power Transmission
  • Enhanced Service Life than the classical belt
  • Oil & Heat Resistant
  • High Flexibility & High Wear Resistance
Sections Top Width (mm) Thickness (mm) Angle Min. Range (inches) Max. Range (inches) Length Designation
3LX 9.65 6.00 38° 24 80 La
4LX 12.70 8.00 38° 24 80 La
5LX 16.70 9.7 38° 24 150 La
ZX / 10x 10 6 38° 24 80 Li
AX / 13x 13 8 38° 24 80 Li
BX / 17x 17 11 38° 25 150 Li
CX / 22x 22 14 38° 28 150 Li
DX / 32x 32 20 38° 40 150 Li
Cut Edge Wedge Belts
Sections Top Width (mm) Thickness (mm) Angle Min. Range (mm) Max. Range (mm) Length Designation
XPZ 9.7 8.00 38° 700 2100 Lp
XPA 12.70 10.00 38° 700 2100 Lp
XPB 16.30 13 38° 700 3800 Lp
XPC 22 18 38° 800 3800 Lp
Cut Edge Narrow Belts
Sections Top Width (mm) Thickness (mm) Angle Min. Range (inches) Max. Range (inches) Length Designation
3VX 9.7 8.00 38° 24 80 La
5VX 15.90 13.50 38° 24 150 La

Other Belts

Selected Belt

Cut Edge Belts – Maxi Flex

Enter Product Query

Site Credits : Seigospace